Subaru Crosstrek Service Manual: Wiring diagram
SECURITY AND LOCKS > Keyless Access System
WIRING DIAGRAM
For wiring diagrams related to the keyless access system, refer to the following items.
• Keyless access system: Keyless Access System > WIRING DIAGRAM">
• Push button start system: Push Button Start System > WIRING DIAGRAM">
Electrical specification
SECURITY AND LOCKS > Keyless Access SystemELECTRICAL SPECIFICATIONRefer to “Control Module I/O Signal” of “KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)” sectio ...
Inspection
SECURITY AND LOCKS > Keyless Access SystemINSPECTION1. KEYLESS ACCESS WITH PUSH BUTTON START SYSTEMRefer to “Basic Diagnostic Procedure” of “KEYLESS ACCESS WITH PUSH BUTTON START ...
Other materials:
Installation
MECHANICAL(H4DO) > Chain CoverINSTALLATION1. Install the O-rings to cylinder head RH, cylinder head LH, cylinder block LH and oil pan upper.NOTE:• Use new O-rings.• Apply a coat of engine oil to the O-rings.2. Apply liquid gasket if there are gaps between front camshaft cap and cam ca ...
Checking the coolant level
WARNING
Never attempt to remove the radiator
cap until the engine has been
shut off and has cooled down
completely. Since the coolant is
under pressure, you may suffer
serious burns from a spray of boiling
hot coolant when the cap is
removed.
"FULL" level mark
"LOW" level mark
C ...
Replacement of brake pad and lining
The disc brakes have audible wear
indicators on the brake pads. If the brake
pads wear close to their service limit, the
wear indicator makes a very audible
scraping noise when the brake pedal is
applied.
If you hear this scraping noise each time
you apply the brake pedal, have the brak ...
