Subaru Crosstrek Service Manual: Wiring diagram
INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD) System
WIRING DIAGRAM
Refer to “Multi-function Display (MFD) System” in WI section. Multi-function Display (MFD) System > WIRING DIAGRAM">
Electrical specification
INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD) SystemELECTRICAL SPECIFICATION1. MULTI FUNCTION DISPLAY• Standard typeTerminal No.ItemMeasuring conditionStandard1 (+B) ←> C ...
Inspection
INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD) SystemINSPECTION• Standard typeRefer to the following inspection steps. Multi-function Display (MFD) System > INSPECTION"&g ...
Other materials:
Illumination brightness control
The illumination brightness of the instrument
panel dims under the following
conditions.
when the light switch is in the "
" or
" " position
You can also adjust the illumination brightness
for better visibility in the following
ways.
To brighten, turn the control dial upward.
...
Replacement of wiper blades
Grease, wax, insects, or other material on
the windshield or the wiper blade results in
jerky wiper operation and streaking on the
glass. If you cannot remove the streaks
after operating the windshield washer or if
the wiper operation is jerky, clean the
outer surface of the windshield (or rea ...
Basic diagnostic procedure Procedure
AIRBAG SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURESTEPCHECKYESNO1.CHECK WARNING LIGHT.Check whether the airbag warning light in the combination meter is lit.Does the airbag warning light illuminate? Basic Diagnostic Procedure > PROCEDURE">Go to Step 2.Perform the diagnos ...
