Subaru Crosstrek Service Manual: Specification
VEHICLE DYNAMICS CONTROL (VDC) > General Description
SPECIFICATION
Item | Specification or identification | |||
ABS wheel speed sensor | ABS wheel speed sensor gap (for reference) | Front | 0.77 — 1.43 mm (0.030 — 0.056 in) | |
Rear | 0.44 — 1.76 mm (0.017 — 0.069 in) | |||
Identifications of harness (symbol) | Front | RH | Z1 | |
LH | Z2 | |||
Rear | RH | Z5 | ||
LH | Z6 | |||
VDCCM&H/U identification | Models without EyeSight | XQ | ||
Models with EyeSight | CZ | |||
Caution
VEHICLE DYNAMICS CONTROL (VDC) > General DescriptionCAUTION• Wear appropriate work clothing, including a helmet, protective goggles and protective shoes when performing any work.• Remov ...
Component
VEHICLE DYNAMICS CONTROL (VDC) > General DescriptionCOMPONENT1. ABS WHEEL SPEED SENSOR(1)Front ABS wheel speed sensor(4)Rear ABS wheel speed sensorTightening torque: N·m (kgf-m, ft-lb)(2)Hou ...
Other materials:
Electrical component location Location
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)Engine control module (ECM)(4)Cruise indicator light and cruise set indicator light(7)Neutral position switch (MT model)(2)Cruise control command switch(5)Transmission control module (TCM) (CVT model)(8)Clutch switch (M ...
Dtc u0155 lost communication with instrument panel cluster (ipc) control module
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0155 LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULEDetected when CAN data from combination meter does not arrive.NOTE:Perform the diagnosis for LAN syst ...
Replacing bulbs
WARNING
Bulbs may become very hot while
illuminated. Before replacing bulbs,
turn off the lights and wait until the
bulbs cool down. Otherwise, there is
a risk of sustaining a burn injury.
CAUTION
Replace any bulb only with a new
bulb of the specified wattage.
Using a bulb of differe ...