Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Engine oil temperature sensor

Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Coolant Temperature SensorINSTALLATIONInstall in the reverse order of removal.NOTE:Use a new gasket.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft- ...

Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Oil Temperature SensorINSPECTION1. Check that the engine oil temperature sensor has no deformation, cracks or other damages.2. Immerse the engine oil te ...

Other materials:

Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Evaporator SensorINSTALLATIONCAUTION:• Make sure that the water seal packing on the cover attachment area is securely attached.• Replace the O-rings with new parts, and then apply compressor oil.• Before handling the airbag system compo ...

Removal
INTAKE (INDUCTION)(H4DO) > Air Intake BootREMOVAL1. Remove the clip (A) from the air intake boot.2. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.3. Loosen the clamp (C) which secures the throttle body to the air intake boot.4. Disconnect the PCV hose and remove ...

Assembly
CLUTCH SYSTEM > Operating CylinderASSEMBLYNOTE:During assembly, apply hydraulic oil to all parts.Recommended brake fluid:New FMVSS No. 116 DOT3 or DOT41. Install the piston spring.2. Insert piston into the operating cylinder.3. Install push rod to the boot.4. Install the boot and push rod. ...

© 2016-2024 Copyright www.sucross.com