Subaru Crosstrek Service Manual: Dtc u0140 lost communication with body control module

DTC DETECTING CONDITION:

No data is received from body integrated unit.

TROUBLE SYMPTOM:

Cooperation control with body integrated unit does not operate properly.

1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.

Was the basic diagnostic procedure performed up to STEP 3?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 2.

Perform the basic diagnostic procedure. Basic Diagnostic Procedure">

2.CHECK DTC.

Check the displayed DTC.

Are DTCs other than U*** displayed?

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 3.

3.CHECK DTC.

Check the displayed DTC.

Is U0140 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 4.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 8.

4.CHECK DTC.

1) Check CAN communication circuit. CAN Communication Circuit Check">

2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0140 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 5.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 8.

5.CHECK DTC.

Using the Subaru Select Monitor, read DTC of all the systems. Read Diagnostic Trouble Code (DTC)">

Is the body integrated data no-receive detected in several modules?

Replace the body integrated unit. Body Integrated Unit">

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 6.

6.REPLACE MODULE.

1) Replace the body integrated unit.

2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0140 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 7.

System is normal.

7.CHECK MODULE.

1) Reinstall the body integrated unit.

2) Replace the module that the DTC has been detected.

3) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0140 a current malfunction?

Replace the body integrated unit. Body Integrated Unit">

System is normal.

8.CHECK HARNESS.

1) Shake the harness, and check for poor contact.

2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0140 a current malfunction?

Repair the poor contact of harness, or replace the harness.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE">Go to Step 9.

9.CHECK CONNECTOR.

Check the connector used for high speed CAN for poor contact.

Is there poor contact of connector?

Repair the connector that has poor contact, or replace harness.

It is possible that temporary poor communication occurs. Delete the DTC.

Dtc u0131 lost communication with power steering control module

Dtc u0151 lost communication with restraints control module

Other materials:

System features
BSD/RCTA consists of the following functions. To detect a vehicle in a blind spot on an adjacent lane or a vehicle approaching at high speed while driving the vehicle (Blind Spot Detection) To detect a vehicle approaching from the right or left while reversing the vehicle (Rear Cross ...

Automatic headlight beam leveler warning light (models with HID headlights)
This light illuminates when the automatic headlight beam leveler does not operate normally. If this light illuminates while driving or does not turn off approximately 3 seconds after turning the ignition switch to the "ON" position, have your vehicle inspected at your SUBARU dealer. Fr ...

Profiles
This system supports the following services. NOTE If your cell phone does not support HFP, registering the Bluetooth phone or using OPP, PBAP, or SPP profiles individually will not be possible. If the connected Bluetooth device version is older than recommended or incompatible, the ...