Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Vehicle dynamics control (vdc) (diagnostics)

Subaru Crosstrek Service Manual / Vehicle dynamics control (vdc) (diagnostics)

Register transmitter (id) Operation
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Register Transmitter (ID)OPERATIONPerform the registration procedure of the transmitter in the following cases:• Transmitter is replaced.• ...

Control module i/o signal
...

Other materials:

CVT models
1. Apply the parking brake. 2. Turn off unnecessary lights and accessories. 3. Shift the select lever to the "P" or "N" position (preferably the "P" position). The starter motor will only operate when the select lever is at the "P" or "N" position. 4. Turn the ignition switch to the "O ...

Activating and deactivating the alarm system
To change the setting of your vehicle's alarm system for activation or deactivation, do the following. 1. Disarm the alarm system. Refer to "Disarming the system" 2-30. 2. Sit in the driver's seat and shut all doors and the rear gate. 3. Turn the ignition switch to the "ON" position. ...

Installation
WIPER AND WASHER SYSTEMS > Front Washer Nozzle and HoseINSTALLATIONCAUTION:Before installing the windshield glass and cowl panel, make sure there are no gravel in the installing area.1. Install the nozzle - windshield washer.(1) Install the nozzle - windshield washer.(2) Install the hose - windsh ...

© 2016-2024 Copyright www.sucross.com