Subaru Crosstrek Service Manual: Vehicle dynamics control (vdc)
- Abs sequence control
- Front abs wheel speed sensor
- Front magnetic encoder
- General description
- Rear abs wheel speed sensor
- Rear magnetic encoder
- Relay and fuse
- Vdc control module and hydraulic control unit (vdccm h/u)
- Vdc off switch
- Vdc sequence control
- Vehicle dynamics control system
- Yaw rate and g sensor
- Steering angle sensor Replacement
Read diagnostic trouble code (dtc) Operation
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the vehicle inform ...
Other materials:
Basic diagnostic procedure Procedure
IMMOBILIZER (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURE1. MODEL WITHOUT KEYLESS ACCESS WITH PUSH BUTTON START SYSTEMCAUTION:When the body integrated unit is replaced, registration of the immobilizer system is required. For details, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER&r ...
Dtc p0112 intake air temperature sensor 1 circuit low bank 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0112 INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT LOW BANK 1DTC detecting condition:Immediately at fault recognitionTrouble symptom:• Improper idling• Poor driving performanceCAUTION:After servicing or ...
Removal
STARTING/CHARGING SYSTEMS(H4DO) > StarterREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the clip (A) from the air intake boot.3. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.4. Loosen the clamp (C) which secures the throttle body t ...
