Subaru Crosstrek Service Manual: Tire pressure monitoring system (diagnostics)
- Control module i/o signal
- Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc c2021 tire 1 air pressure low (normal mode)
- Dtc c2521 speed abnormal
- Dtc c2022 tire 2 air pressure low (normal mode)
- Dtc c2023 tire 3 air pressure low (normal mode)
- Dtc c2024 tire 4 air pressure low (normal mode)
- Dtc c2121 transmitter 1 no data
- Dtc c2122 transmitter 2 no data
- Dtc c2123 transmitter 3 no data
- Dtc c2124 transmitter 4 no data
- Dtc c2221 transmitter 1 pressure data abnormal
- Dtc c2222 transmitter 2 pressure data abnormal
- Dtc c2223 transmitter 3 pressure data abnormal
- Dtc c2224 transmitter 4 pressure data abnormal
- Dtc c2321 transmitter 1 function code abnormal
- Dtc c2322 transmitter 2 function code abnormal
- Dtc c2323 transmitter 3 function code abnormal
- Dtc c2324 transmitter 4 function code abnormal
- Dtc c2421 transmitter 1 battery voltage low
- Dtc c2422 transmitter 2 battery voltage low
- Dtc c2423 transmitter 3 battery voltage low
- Dtc c2424 transmitter 4 battery voltage low
- General description
- Read current data
- Subaru select monitor
- Tire pressure warning light / trouble indicator light illumination pattern
- Inspection
- Tire pressure warning light is 25 times blinking and turn on
- Tire pressure warning light does not come on
- Tire pressure warning light does not come off
- Basic diagnostic procedure Procedure
- Clear memory mode Operation
- Display transmitter (id) Operation
- Electrical component location Location
- General diagnostic table Inspection
- Inspection mode Procedure
- List of diagnostic trouble code (dtc) List
- Read diagnostic trouble code (dtc) Operation
- Register transmitter (id) Operation
Inspection mode Procedure
TELEMATICS SYSTEM (DIAGNOSTICS) > Inspection ModePROCEDUREIt is possible to diagnose the DTC by performing the indicated inspection mode.After correcting the DTC, perform a necessary inspection mod ...
Other materials:
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel PumpREMOVALWARNING:Place “NO OPEN FLAMES” signs near the working area.CAUTION:• Be careful not to spill fuel.• Catch the fuel from the tubes using a container or cloth.• If the fuel gauge indicates that two thirds or more of ...
Dtc b2a0d airbag signal
TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2A0D AIRBAG SIGNALDiagnosis start condition:When ignition switch is ON.DTC detecting condition:Either the regular signal or collision signal cannot be detected from the airbag CM for at least 30 seconds. ...
Removal
LUBRICATION(H4DO) > Engine Oil FilterREMOVALCAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emitting smoke or causing a fire.1. OIL FILTER1. Turn the ignition switch to OFF.2. Remove the oil filter.NOTE:Clean off water or dust from the oil ...
