Subaru Crosstrek Owners Manual: Maintenance and service
- Maintenance schedule
- Maintenance precautions
- Before checking or servicing in the engine compartment
- When checking or servicing in the engine compartment
- Engine hood
- Engine compartment overview
- Engine oil
- Engine oil consumption
- Checking the oil level
- Changing the oil and oil filter
- Recommended grade and viscosity
- Synthetic oil
- Cooling system
- Air cleaner element
- Spark plugs
- Drive belts
- Manual transmission oil
- Continuously variable transmission fluid
- Front differential gear oil (CVT models) and rear differential gear oil
- Brake fluid
- Clutch fluid (MT models)
- Brake booster
- Brake pedal
- Clutch pedal (MT models)
- Hill start assist system
- Replacement of brake pad and lining
- Parking brake stroke
- Tires and wheels
- Types of tires
- Tire pressure monitoring system (TPMS) (if equipped)
- Tire inspection
- Tire pressures and wear
- Wheel balance
- Wear indicators
- Tire rotation direction mark
- Tire rotation
- Tire replacement
- Wheel replacement
- Aluminum wheels
- Windshield washer fluid
- Replacement of wiper blades
- Windshield wiper blade assembly
- Windshield wiper blade rubber
- Rear window wiper blade assembly
- Rear window wiper blade rubber
- Battery
- Fuses
- Installation of accessories
- Replacing bulbs
- Headlights (models with HID headlights)
- Headlights (models without HID headlights)
- Rear combination lights
- License plate light
- Map light
- Dome light and cargo area light
- Replacing key battery
Monitor (if equipped)
To clean the audio/navigation/multi function
display monitor, wipe it with a silicone
cloth or with a soft cloth. If the monitor is
extremely dirty, clean it with a soft cloth
moistened with neutr ...
Maintenance schedule
U.S. models
The scheduled maintenance items required
to be serviced at regular intervals
are shown in the "Warranty and Maintenance
Booklet". For details, read the
separate "Warranty and Maintena ...
Other materials:
Dtc u0073 control module communication bus off
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0073 CONTROL MODULE COMMUNICATION BUS OFFDetected when CAN line abnormality is detected.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE"> ...
Basic operation
Control switch
Up (select)
ENTER (push)
Down (select)
By operating "
" or "
" of the control
switch, the screens and selection items
can be switched. When the button is
pushed, the item can be selected and set. ...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Blower MotorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Release the clips, and remove the under cover assembly - passenger.3. Remove the blower - motor.(1) Disconnect the connector.(2) Remove the screws and detach the blower - m ...
