Subaru Crosstrek Service Manual: Lighting system
- Auto headlight beam leveler control module
- Auto headlight beam leveler system
- Back-up light bulb
- Back-up light system
- Clearance light and illumination light system
- Clearance/parking light bulb
- Combination switch (light)
- Day time running light system
- Day time running resistor
- Door switch
- Front fog light assembly
- Front fog light bulb
- Front fog light system
- Front side marker light bulb
- Front turn signal light bulb
- General description
- Glove box light
- Hazard switch
- Headlight assembly
- Headlight bulb
- Headlight system
- High-mounted stop light
- Ignition switch illumination
- Interior light system
- License plate light
- Light control sensor
- Luggage room light
- Rear combination light assembly
- Rear height sensor
- Rear side marker light bulb
- Rear turn signal light bulb
- Reflex reflector
- Relay and fuse
- Room light
- Side turn signal light assembly
- Spot map light
- Srf off switch
- Stop light system
- Tail/stop light bulb
- Turn signal light and hazard light system
- Turn signal light hazard light unit
Read diagnostic trouble code (dtc) Operation
LAN SYSTEM (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and sel ...
Other materials:
Dtc c1511 valve relay
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1511 VALVE RELAYDTC detecting condition:Defective valve relayTrouble symptom:• ABS does not operate.• EBD does not operate.• VDC does not operate.• Hill start assist ...
Dtc p0132 a/f / o2 sensor circuit high voltage bank 1 sensor 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0132 A/F / O2 SENSOR CIRCUIT HIGH VOLTAGE BANK 1 SENSOR 1DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode ...
Adjustment
POWER ASSISTED SYSTEM (POWER STEERING) > Electric Power Steering GearboxADJUSTMENT1. GEARBOX BACKLASH ADJUSTMENT1. Remove the steering gearbox assembly. Electric Power Steering Gearbox > REMOVAL">2. Loosen the lock nut and adjusting screw.3. Apply a coat of grease to the sliding surfa ...
