Subaru Crosstrek Service Manual: Reduction drive gear Note
TRANSFER CASE > Reduction Drive Gear
NOTE
For removal, installation and inspection, refer to “CVT” section. Reduction Drive Gear">
Oil seal Note
TRANSFER CASE > Oil SealNOTEFor removal, installation and inspection, refer to “CVT” or “5MT” section.CVT model: Extension Case Oil Seal">5MT model: Oil Seal"&g ...
Reduction driven gear Note
TRANSFER CASE > Reduction Driven GearNOTEFor removal, installation and inspection, refer to “CVT” section. Reduction Driven Gear"> ...
Other materials:
Dtc p2420 evap system switching valve control circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2420 EVAP SYSTEM SWITCHING VALVE CONTROL CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > ...
Hill start assist system
Ensure that the Hill start assist system
operates properly under the following
circumstances.
1. Stop the vehicle on an uphill grade by
depressing the brake pedal (all models)
and clutch pedal (MT models only), with
the engine running.
2. Make sure that the vehicle does not
move backward ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Pressure SensorINSTALLATIONCAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• After installing the secondary pressure sensor, ...