Subaru Crosstrek Service Manual: Purge control solenoid valve

Installation

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > PCV ValveINSTALLATIONInstall in the reverse order of removal.NOTE:Apply liquid gasket to the bolt threads of PCV valve.Liquid gasket:THREE B ...

Inspection

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Purge Control Solenoid ValveINSPECTION1. PURGE CONTROL SOLENOID VALVE1. Check that the purge control solenoid valve has no deformation, crac ...

Other materials:

Most common causes of corrosion
The most common causes of corrosion are: The accumulation of moisture retaining dirt and debris in body panel sections, cavities, and other areas. Damage to paint and other protective coatings caused by gravel and stone chips or minor accidents. Corrosion is accelerated on the vehic ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Driven GearINSTALLATION1. Install the reduction driven gear assembly and spacer oil.Tightening torque:17 N·m (1.7 kgf-m, 12.5 ft-lb)2. Select the transfer drive gear shim. Reduction Drive Gear > ADJUSTMENT">3. Install the pa ...

Removal
GLASS/WINDOWS/MIRRORS > Power Window Control SwitchREMOVAL1. MAIN SWITCH1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">2. Remove the trim panel - front door. Door Trim > REMOVAL">3. Remove the panel - power window main ...