Installation
CONTROL SYSTEMS > Select CableINSTALLATION1. Position the select cable as shown in the figure, and install it to the plate assembly.CAUTION:• If the cable is installed in the wrong direction, loosen the bracket bolts, and then reinstall the cable in the correct direction.• Do not adju ...
Unlocking
Perform steps 1 to 5 described in "Registration".
NOTE
You cannot unlock by PIN Code
Access in the following cases.
when the access key is within the
operating ranges
when the ignition switch is in the
"ACC" or "ON" position
If you make an operation error
during the unlocking proced ...
Door unlock selection function
The door unlock selection function makes
the following operations possible.
Unlocking the driver's door without
unlocking any other doors (including the
rear gate) when gripping the driver's door
handle
Opening the rear gate without unlocking
any doors when pressing the rear gate
op ...