Subaru Crosstrek Service Manual: Oil pump Specification
LUBRICATION(H4DO) > Oil Pump
SPECIFICATION
The oil pump cannot be disassembled.
Refer to “Chain Cover” for removal and installation procedures. Chain Cover > REMOVAL">
Chain Cover > INSTALLATION">
Engine lubrication system trouble in general Inspection
LUBRICATION(H4DO) > Engine Lubrication System Trouble in GeneralINSPECTIONBefore performing diagnostics, make sure that the engine oil level is correct and no oil leakage exists.TroublePossible cau ...
Other materials:
Dtc u0423 invalid data received from instrument panel cluster control module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULEDTC DETECTING CONDITION:Defective data was transmitted from combination meter.TROUBLE SYMPTOM:Display of combination meter does not operate ...
Inspection
COMMUNICATION SYSTEM > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and check visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Check the resistance between relay terminals.Terminal No.Inspection conditionsSpecificationCircuit1 — 2Always1 M? or more1 — 2Apply ...
Removal
EXTERIOR/INTERIOR TRIM > Rear Gate GarnishREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear gate. Rear Gate Trim > REMOVAL">3. Remove the arm assembly - rear wiper.(1) Remove the cover - rear wiper arm.(2) Remove the nut, and remove the ...
