Subaru Crosstrek Service Manual: Note
INSTRUMENTATION/DRIVER INFO > Combination Meter System
NOTE
For procedure of each component in the combination meter system, refer to the respective section.
• Combination meter assembly: Combination Meter">
• Speedometer: Speedometer">
• Tachometer: Tachometer">
• FUEL meter: Fuel Gauge">
• ECO gauge: ECO Gauge">
Inspection
INSTRUMENTATION/DRIVER INFO > Combination Meter SystemINSPECTIONRefer to “Basic Diagnostic Procedure” of “INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS)” section. Basic Diagnost ...
Operation
INSTRUMENTATION/DRIVER INFO > Combination Meter SystemOPERATION1. SELF-DIAGNOSIS DISPLAY MODEThe self-diagnosis (checking of each meter, warning light, indicator light, illumination, LCD/TFT) of co ...
Other materials:
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > In-Vehicle Sensor (Auto A/C Model)INSPECTION1. Set the vehicle to the following conditions.ItemConditionIgnition switchONA/C switchONTemperature adjustment dialHI (MAX HOT)Air flow control dial or switchDEFFan dialHI (MAX)2. Check the suction port (A) fo ...
Procedure
LIGHTING SYSTEM > Auto Headlight Beam Leveler SystemPROCEDUREWhen parts related to the auto headlight beam leveler system are removed or replaced, perform the following procedures to initialize or reinitialize.NOTE:Before performing initialization or reinitialization, check the following:• ...
Disassembly
DIFFERENTIALS > Rear Differential (VA-type)DISASSEMBLYTo detect the real cause of trouble, inspect the following items before disassembling.• Tooth contact and backlash between hypoid driven gear and drive pinion1. Set the ST on vise and install the differential assembly to ST.ST 3982177 ...
