Subaru Crosstrek Service Manual: List of cancel code List
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > List of Cancel Code
LIST
NOTE:
• The cancel code is registered even when cancel is performed intentionally by the driver.
• Cancel codes are cleared if the ignition switch is turned to OFF.
• If a different cancel code is input after a cancel code (latest code) has been input, the latest code is overwritten.
• If the cruise indicator light is flashing, a malfunction is occurring in the system or cruise control related switch. The cancel code at this time is saved even after ignition switch is OFF as a memory code of a past malfunction.
• To display a cancel code, use the Subaru Select Monitor to read the code after the cruise control is deactivated during a driving test.
Cancel code | Item | Contents of diagnosis | Note |
11 | Main switch | CRUISE switch of cruise control command switch is turned to OFF, and then the cruise control is released. | This code is displayed without operating the CRUISE switch. Diagnostic Procedure with Cancel Code > 11"> |
12 | Stop & brake switch | Stop light switch or brake switch is turned to ON, and then the cruise control is released. | This code is displayed without depressing the brake pedal. Diagnostic Procedure with Cancel Code > 12"> |
13 | Clutch switch | Clutch switch is turned to ON, and then the cruise control is released. | This code is displayed without depressing the clutch pedal. Diagnostic Procedure with Cancel Code > 13"> |
14 | Neutral switch | Neutral position switch is turned to ON, and then the cruise control is released. | This code is displayed without shifting to neutral position. Diagnostic Procedure with Cancel Code > 14"> |
15 | Cancel switch | Cancel switch is turned to ON, and then the cruise control is released. | This code is displayed without operating the cancel switch. Diagnostic Procedure with Cancel Code > 15"> |
16 | Ignition switch | Ignition switch is turned to OFF, and then the cruise control is released. | This code is displayed without operating the ignition switch. Diagnostic Procedure with Cancel Code > 16"> |
21 | Cruise control switch malfunction when the ignition switch is ON | When the ignition switch is turned to ON, each switch of cruise control command switch is already turned to ON. | This code is displayed when the ignition switch is turned to ON without operating the cruise control command switch. Diagnostic Procedure with Cancel Code > 21"> |
22 | Abnormality of change in vehicle speed | Malfunction of vehicle speed signal variation is detected. | Diagnostic Procedure with Cancel Code > 22"> |
24 | Abnormality of switches related to cruise control | Open circuit of the cruise control switch is detected during cruise driving. (The system is judged as model without cruise control.) | This code is displayed with normal operation. Diagnostic Procedure with Cancel Code > 24"> |
31 | Abnormal engine speed Signal |
• Abnormal increase of engine speed is detected.
• Gear is placed in Neutral, 1st (MT model only) or Reverse position.
Cruise in 2nd shift position or more. Diagnostic Procedure with Cancel Code > 31">
32
Cruse Control out of Range
• Controlled vehicle speed decreased under the limit during cruising.
• Set operation was performed at vehicle speed unavailable for setting.
• RESUME operation was performed without memorized vehicle speed.
This code is displayed, though the vehicle speed is increased to the speed available for cruise set and set operation was performed again. Diagnostic Procedure with Cancel Code > 32">
34
Prohibition of cruise control at continuing big Accel. angle
The vehicle has been driven at higher speed than set vehicle speed for an abnormally long time (approximately 10 minutes) during cruise driving.
This code is displayed when driving for a long period of time at higher speed than appropriate cruise set vehicle speed by operating accelerator pedal. In this case, the cruise setting is deactivated. Diagnostic Procedure with Cancel Code > 34">
35
Prohibition of cruise control at vehicle speed F/B malfunction
Set vehicle speed cannot be kept because of some reasons (steep uphill, parking brake, abnormal decrease of engine output, etc.) during cruise driving.
This code is displayed when driving condition is not suitable for cruise control. Perform cruise set operation again after clearing the possible cause. Diagnostic Procedure with Cancel Code > 35">
41
VDC/TCS/EPB Operating
Vehicle dynamics control (VDC), TCS or EPB is operated during cruise driving or cruise setting.
This code is displayed when driving condition is not suitable for cruise control. Perform cruise set operation again after clearing the possible cause. Diagnostic Procedure with Cancel Code > 41">
43
ABS/VDC Failure
• During cruise driving or cruise setting, the situation that some or all functions for ABS or VDC can not work is detected.
• CRUISE indicator does not illuminate even though you pressed the CRUISE switch before starting the engine.
Diagnostic Procedure with Cancel Code > 43">
44
Body Integrated unit Failure
Body integrated unit system malfunction is detected during cruise driving or cruise setting.
Diagnostic Procedure with Cancel Code > 44">
45
Meter Failure
Combination meter malfunction is detected during cruise driving or cruise setting.
Diagnostic Procedure with Cancel Code > 45">
49
TCM Failure
Transmission control module (TCM) malfunction is detected during cruise driving or cruise setting.
Diagnostic Procedure with Cancel Code > 49">
61
Brake switch abnormal
Malfunction in the stop light & brake switch is detected.
Diagnostic Procedure with Cancel Code > 61">
62
Neutral switch abnormal
Neutral position switch malfunction is detected.
Diagnostic Procedure with Cancel Code > 62">
63
Abnormality 1 of change in vehicle speed
Malfunction of vehicle speed signal variation is detected.
Diagnostic Procedure with Cancel Code > 63">
64
Engine Sensor Failure 1
Malfunction related to engine is detected.
Diagnostic Procedure with Cancel Code > 64">
65
Abnormality of switches related to cruise control 1
Cruise control command switch malfunction is detected. (When the switch is pressed ON for a long time (approximately two minutes), stuck ON condition is detected.)
Diagnostic Procedure with Cancel Code > 65">
66
Cruise Control Calculation Error
Cruise control calculation (microcomputer) malfunction is detected.
Diagnostic Procedure with Cancel Code > 66">
Electrical component location Location
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)Engine control module (ECM)(4)Cruise indicator light and cruise set indicator light(7)Neutral position switch (MT model ...
Read cancel code Operation
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Read Cancel CodeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «C ...
Other materials:
Preparation tool
BODY CONTROL SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, ...
Assembly
DIFFERENTIALS > Rear Differential (VA-type)ASSEMBLYNOTE:• Assemble in the reverse order of disassembly.• Check and adjust each part during assembly.• Keep the shims and washers in order, so that they are not improperly installed.• Thoroughly clean the surfaces on which the ...
Drive cycle Procedure
ENGINE (DIAGNOSTICS)(H4DO) > Drive CyclePROCEDUREIt is necessary to perform the drive cycle listed below if DTC is not found in the Inspection Mode. It is possible to complete diagnosis of the DTC by performing the indicated drive cycle. After the repair for the DTC, perform a necessary drive cyc ...
