TRANSFER CASE > General Description
NOTE
For general description, refer to “CVT” or “5MT” section.
CVT model:
General Description">
5MT model:
General Description">
Adjustment
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Compressor OilADJUSTMENT• If a component has been replaced, add an appropriate amount of compressor oil (same as the amount of remaining oil in removed component).• When replacing the compressor assembly, the new compressor assembly will alre ...
Clear memory mode Operation
ENGINE (DIAGNOSTICS)(H4DO) > Clear Memory ModeOPERATION1. SUBARU SELECT MONITORNOTE:• Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.• For detailed ope ...
Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft AssemblyASSEMBLY1. Install the sleeve and the gear and hub assembly by matching the alignment marks.NOTE:• Make sure that there is no large clearance at both sides of the 1st-2nd shifting insert after assembly.(A)1st-2nd shiftin ...