Removal
EXTERIOR/INTERIOR TRIM > Front GrilleREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the bumper face - front. Front Bumper > REMOVAL">3. Remove the front grille assembly.(1) Remove the screws from the back side of the bumper face - front.(2) Release the cl ...
Operation
EyeSight (DIAGNOSTICS) > Subaru Select MonitorOPERATION1. GENERAL DESCRIPTIONFor on-board diagnosis function of the EyeSight, use the Subaru Select Monitor.The on-board diagnosis function operates in three categories, which are used depending on the type of problems.1. Diagnosis with diagnostic t ...
Installation
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Leak Check Valve AssemblyINSTALLATION1. Install the leak check valve assembly to the vehicle with the bolt and clip (A).Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Connect the connector to the leak check valve assembly.3. Conn ...