Subaru Crosstrek Service Manual: Electrical component location Location
IMMOBILIZER (DIAGNOSTICS) > Electrical Component Location
LOCATION
(1) | Security indicator light (LED bulb) | (3) | Data link connector | (5) | Transponder |
(2) | Body integrated unit | (4) | Antenna | (6) | Security control module (for C5 model only) |
Diagnostics chart for security indicator light Inspection
IMMOBILIZER (DIAGNOSTICS) > Diagnostics Chart for Security Indicator LightINSPECTION1. CHECK SECURITY INDICATOR LIGHT CIRCUITCAUTION:When the body integrated unit is replaced, registration of the i ...
Immobilizer control module i/o signal Wiring diagram
IMMOBILIZER (DIAGNOSTICS) > Immobilizer Control Module I/O SignalWIRING DIAGRAM1. IMMOBILIZERRefer to “Immobilizer System” in the wiring diagram. Immobilizer System > WIRING DIAGRAM ...
Other materials:
Brake booster
If the brake booster does not operate as
described in the following, have it checked
by your SUBARU dealer.
1. With the ignition switch in the "LOCK"/
"OFF" position, depress the brake pedal
several times, applying the same pedal
force each time. The distance the pedal
travels should not va ...
Installation
VEHICLE DYNAMICS CONTROL (VDC) > VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)INSTALLATION1. MODELS WITHOUT EyeSightCAUTION:• When installing the VDCCM&H/U to the bracket - hydraulic unit, make sure that there is no oil adhered to the bolts and the threads of VDCCM&H ...
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Primary Pulley and Secondary PulleyREMOVALNOTE:Always replace primary pulley and secondary pulley as an assembly because they are non-disassembled parts.1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL& ...
