EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B2801 TCM ABNORMAL
Detected when error occurs in the automatic transmission.
When lost communication with TCM and TCM abnormal occur simultaneously, perform diagnosis for lost communication with TCM first.
NOTE:
Check the automatic transmission. Basic Diagnostic Procedure > PROCEDURE">
Inspection
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingINSPECTION1. Moving the rear tire up and down by hand, check there is no looseness in bearing, and check the wheel rotates smoothly.CAUTION:If there is unsmooth sliding operation or abnormal noise in the bearing, replace the rear hub unit bearing.2. Inspe ...
Vehicle load limit - how to determine
The load capacity of your vehicle is
determined by weight, not by available
cargo space. The load limit of
your vehicle is shown on the
vehicle placard attached to the
driver's side door pillar. Locate the
statement "The combined weight of
occupants and cargo should never
exceed XXX kg or XX ...
Inspection
SECURITY AND LOCKS > Rear Gate Opener ButtonINSPECTIONPreparation tool:Circuit tester1. Check the resistance between switch terminals.Terminal No.Inspection conditionsStandardConnection diagram1 — 2OPENLess than 5 ?• Model without keyless access with push button start• Model with ke ...