Subaru Crosstrek Service Manual: Disassembly

Subaru Crosstrek Service Manual / Cooling(h4do) / Radiator main fan and fan motor / Disassembly

COOLING(H4DO) > Radiator Main Fan and Fan Motor

DISASSEMBLY

1. Remove the clip which holds the main fan motor connector onto the radiator main fan shroud.

2. Disconnect the radiator main fan from the main fan motor.

3. Disconnect the main fan motor from the radiator main fan shroud.

Removal

COOLING(H4DO) > Radiator Main Fan and Fan MotorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the reservoir tank. Reservoir Tank > REMOVAL">3. Disconnect t ...

Inspection

COOLING(H4DO) > Radiator Main Fan and Fan MotorINSPECTIONCheck that the radiator main fan, radiator main fan shroud and main fan motor assembly do not have deformation, cracks or damage. ...

Other materials:

Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Drive GearADJUSTMENT1. Remove the retaining springs and reduction drive gear shims.2. Install the transmission case, and secure it with four or five bolts.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)3. Measure depth “A” ...

Installation
POWER ASSISTED SYSTEM (POWER STEERING) > Steering ColumnINSTALLATIONCAUTION:If the steering wheel and steering angle sensor are removed, perform the following VDC setting mode.– Model without EyeSight: VDC sensor midpoint setting mode VDC Control Module and Hydraulic Control Unit (VDCCM&H ...

Starting the engine
NOTE All vehicle doors (including rear gate) and the engine hood must be closed prior to activating the remote engine start system. Any open entry point will prevent starting or cause the engine to stop. The remote engine start system is activated by pressing the fob button on your remote e ...