Subaru Crosstrek Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc b1401 meter collation
- Dtc b1571 reference code incompatibility (immobilizer cm to ecm)
- Dtc b1402 immobilizer key collation
- Dtc b1405 scu collation
- Dtc b1406 scu_eeprom
- Dtc b1407 met communication
- Dtc b1408 meter non-volatile memory
- Dtc b1409 scu communication
- Dtc b1410 transponder communication
- Dtc b1411 immobilizer antenna
- Dtc b1570 antenna
- Dtc b1572 imm circuit except antenna circuit
- Dtc b1574 key communication
- Dtc b1575 incorrect immobilizer key
- Dtc b1576 egi control module eeprom
- Dtc b1577 imm control module eeprom
- Dtc b1578 meter
Dtc b1401 meter collation
IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1401 METER COLLATIONDTC DETECTING CONDITION:Reference code incompatibility between combination meter and body ...
Other materials:
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Ambient SensorINSPECTION1. Visually check the ambient sensor for dirt or damage, and clean or replace as necessary.2. Check the resistance between ambient sensor terminals.CAUTION:During inspection, be careful not to touch the sensor end in order to avoi ...
Blind Spot Detection (BSD)
Operating range
The system warns the driver of dangers as
follows.
If the system detects vehicles in the
driver's blind spots, the BSD/RCTA approach
indicator light(s) on the outside
mirror(s) will illuminate.
If the driver operates the turn signal
lever to the side where th ...
Basic diagnostic procedure Procedure
BODY CONTROL SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURECAUTION:• Subaru Select Monitor is required for reading DTC, performing diagnosis and reading current data.• Remove foreign matter (dust, water, oil, etc.) from the body integrated unit connector during removal and ...
