Subaru Crosstrek Service Manual: Crank pulley

Installation

MECHANICAL(H4DO) > Chain CoverINSTALLATION1. Install the O-rings to cylinder head RH, cylinder head LH, cylinder block LH and oil pan upper.NOTE:• Use new O-rings.• Apply a coat of engi ...

Inspection

MECHANICAL(H4DO) > Crank PulleyINSPECTION1. Check that the crank pulley has no deformation, cracks or other damages.2. Inspect for oil leakage from the front oil seal. If there is an oil leak, repl ...

Other materials:

Operation
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > AWD Warning Light DisplayOPERATIONAWD light illuminates or blinks, when the AWD is in special control condition and AWD has malfunction.• At normal conditionAfter turning the ignition switch to ON, illuminates for 2 seconds then goes off.&b ...

Dtc p2530 ignition switch run position circuit
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2530 IGNITION SWITCH RUN POSITION CIRCUITDTC detecting condition:Immediately at fault recognitionTrouble symptom:Faulty TCM operationCAUTION:Use the check board when measuring the TCM te ...

Dtc c1362 normal closing valve 2
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1362 NORMAL CLOSING VALVE 2DTC detecting condition:• Defective harness connector• Defective VDCH/U solenoid valveTrouble symptom:• ABS does not operate.• EBD does not ...