Inspection
CLUTCH SYSTEM > FlywheelINSPECTIONCAUTION:Because the center pilot bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or solvents.1. If there is damage or defectiveness in the facing sliding surface or ring gear, replace the flywheel.(A)Flywheel(B)Ring gear2. Smooth ...
Removal
LIGHTING SYSTEM > High-mounted Stop LightREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear gate UPR. Rear Gate Trim > REMOVAL">3. Remove the light assembly - high-mounted.(1) Remove the nut.(2) From the inside of the r ...
Installation
EXTERIOR BODY PANELS > Rear Sealing CoverINSTALLATIONCAUTION:• If the sealing cover - rear door gets broken, replace it with a new part.• Apply a butyl tape evenly.• Attach the sealing cover - rear door, keeping it from becoming wrinkled.• If the butyl tape is applied unev ...