Subaru Crosstrek Service Manual: Assembly

Assemble in the reverse order of disassembly.

Tightening torque:

4.41 N·m (0.45 kgf-m, 3.25 ft-lb)

Tightening torque:

3.4 N·m (0.3 kgf-m, 2.5 ft-lb)

Radiator sub fan and fan motor

Removal

Other materials:

Removal
LIGHTING SYSTEM > Tail/Stop Light BulbREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear combinatio ...

Service mode (models without "keyless access with push-button start system")
In service mode, the remote engine start function is temporarily disabled to prevent the system from unexpectedly starting the engine while being serviced. To engage or disengage service mode: 1. Enter the vehicle and close all vehicle doors and the rear gate. 2. Verify that the select le ...

Cleaning ventilation grille
Front ventilation inlet grille Always keep the front ventilation inlet grille free of snow, leaves, or other obstructions to ensure efficient heating and defrosting. Since the condenser is located in front of the radiator, this area should be kept clean because cooling performance i ...