Inspection
CLUTCH SYSTEM > Release Bearing and LeverINSPECTION1. RELEASE BEARINGCAUTION:Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.1. Check the bearing for smooth movement by applying force to the bearing in the ...
Inspection
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingINSPECTION1. Moving the rear tire up and down by hand, check there is no looseness in bearing, and check the wheel rotates smoothly.CAUTION:If there is unsmooth sliding operation or abnormal noise in the bearing, replace the rear hub unit bearing.2. Inspe ...
Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center DifferentialINSTALLATION1. Attach the center differential to transfer case.2. Install the transfer driven gear. Transfer Driven Gear > INSTALLATION">3. Install the transfer case together with the extension case assembly. Transfer Cas ...