Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Remote engine start system (dealer option)

Subaru Crosstrek Owners Manual / Starting and operating / Remote engine start system (dealer option)

WARNING

The remote engine start system allows you to start the engine from outside the vehicle. In addition, the remote engine start system can activate the heater or air conditioner, providing you with a comfortable cabin upon entry.

NOTE

The length of time for which it is acceptable to allow the engine to remain idling may be bound by local laws and regulations. Check the local rules when using the remote engine start system.

Stopping engine
Stop the vehicle completely. Move the select lever to the "P" position. Press the push-button ignition switch. The engine will stop, and the power will be switched off. WARNING Do not ...

Models with "keyless access with push-button start system"
NOTE For more details, refer to the Owner's Manual supplement for the remote engine start system. Access key Lock button An access key can be used as the remote engine start transmitter. ...

Other materials:

Fuel consumption screen setting
1. Perform the preparation steps according to "Preparation for screen settings" 2. Operate the "  " or "  " switch to select the "Cons" item. Then push the button. 3. Push the button once more. 4. Select the displayed configuration by operating the " " or ...

Dtc b2a08 sos button circuit
TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2A08 SOS BUTTON CIRCUITDiagnosis start condition:When ignition switch is ON.DTC detecting condition:The following conditions occur for at least 50 ms.• SOS button impedance is more than 10 k?.&bull ...

Removal
CONTROL SYSTEMS > AT Shift Lock Solenoid and “P” Range SwitchREMOVAL1. SOLENOID UNIT1. Remove the AT select lever. Select Lever > REMOVAL">2. Remove the spacer and gasket. Select Lever > DISASSEMBLY">3. Using a flat tip screwdriver with a thin tip, remove the h ...

© 2016-2024 Copyright www.sucross.com