TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostics with Phenomenon
LIST
No. | Symptoms | Reference |
1 | The system does not notify the Telematics Service Provider Center automatically after collision. | Diagnostics with Phenomenon > INSPECTION"> |
2 | The system does not notify the center even if the SOS button is pressed. | Diagnostics with Phenomenon > INSPECTION"> |
3 | The system places an SOS call unintentionally during driving. | Diagnostics with Phenomenon > INSPECTION"> |
4 | The system places an I-CALL unintentionally during driving. | Diagnostics with Phenomenon > INSPECTION"> |
5 | The system does not notify the center even if the i-button is pressed upon vehicle malfunction. | Diagnostics with Phenomenon > INSPECTION"> |
6 | Remote Vehicle Locator cannot locate the vehicle. | Diagnostics with Phenomenon > INSPECTION"> |
7 | Remote Vehicle Locator indicates an incorrect location and therefore the vehicle cannot be located. | Diagnostics with Phenomenon > INSPECTION"> |
8 | Remote Door Lock does not lock the doors of the vehicle. | Diagnostics with Phenomenon > INSPECTION"> |
9 | The doors lock unintentionally. | Diagnostics with Phenomenon > INSPECTION"> |
10 | The doors unlock unintentionally. | Diagnostics with Phenomenon > INSPECTION"> |
11 | Remote Horn & HAZARD Lights do not operate upon request. | Diagnostics with Phenomenon > INSPECTION"> |
12 | When the Vehicle Security Alarm is activated, notification is not sent. | Diagnostics with Phenomenon > INSPECTION"> |
13 | When a Malfunction indicator light/warning light is lit, notification is not sent. | Diagnostics with Phenomenon > INSPECTION"> |
14 | Maintenance Notifications are not sent. | Diagnostics with Phenomenon > INSPECTION"> |
15 | The LED does not display the status. (LED malfunction) | Diagnostics with Phenomenon > INSPECTION"> |
16 | Phone conversation is not possible. (The microphone does not respond to a voice. No sound is heard from the speaker.) | Diagnostics with Phenomenon > INSPECTION"> |
Preparation tool
WIPER AND WASHER SYSTEMS > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, refer to ...
Note
LIGHTING SYSTEM > Turn Signal Light and Hazard Light SystemNOTEFor operation procedures of each component of the turn signal and hazard light system, refer to the respective sections.• Combination switch (light): Combination Switch (Light)">• Front turn signal light bulb: Fr ...
Dtc b2781 steering lock cm control circuit
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2781 STEERING LOCK CM CONTROL CIRCUITDTC DETECTING CONDITION:• When malfunction is detected in lock/unlock position detection sensor.• When the open or short circui ...