Subaru Crosstrek Service Manual: Instrumentation/driver info
- Combination meter
- Combination meter system
- General description
- Multi-function display (mfd)
- Multi-function display (mfd) system
- Relay and fuse
- Steering switch
- Eco gauge Specification
- Fuel gauge Specification
- Speedometer Specification
- Tachometer Specification
Read diagnostic trouble code (dtc) Operation
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATION1. COMBINATION METER1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input t ...
Other materials:
Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Drive GearADJUSTMENT1. Remove the retaining springs and reduction drive gear shims.2. Install the transmission case, and secure it with four or five bolts.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)3. Measure depth “A” ...
Removal
SECURITY AND LOCKS > Access BuzzerREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle.3. Remove the clips and screws, and turn over the front side of the mud guard - front RH.4. Remove the access buzzer.(1) Disconnect the connector.(2) Remove the clip and det ...
Inspection
SECURITY AND LOCKS > Push Button Ignition SwitchINSPECTION1. Check the continuity between push button ignition switch terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsSpecification4 (COM) — 5 (GND)AlwaysContinuity exists7 (SSW1) — 5 (GND)Push button ignition switch re ...
