Subaru Crosstrek Service Manual: Glove box light
Preparation tool
LIGHTING SYSTEM > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for el ...
Inspection
LIGHTING SYSTEM > Glove Box LightINSPECTION1. Install the light to test if it illuminates normally.2. If it fails to illuminate normally, replace the light - pocket with a new part.NOTE:Since LED ( ...
Other materials:
General settings
Touch the tab for the audio unit
basic
settings.
Item
Function
System
Language
Select to change the language
Button
Beeps
Select to set the sound beeps
on/off.
System
Software
Select to update software versions.
This menu is not ...
Installation
LIGHTING SYSTEM > Headlight BulbINSTALLATIONCAUTION:Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).1. Install each part in the reverse order of removal.2. When performi ...
Removal
LIGHTING SYSTEM > Front Fog Light BulbREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the screw and clips, and turn over the front side of the mud guard - front.3. From the bottom of the bumper face - front, remove the front fog light bulb.CAUTION:Use a dry clean clot ...
