Subaru Crosstrek Service Manual: General description

Installation

EXTERIOR BODY PANELS > Front Sealing CoverINSTALLATIONCAUTION:• If the sealing cover - front door gets broken, replace it with a new part.• Apply a uniform bead of butyl tape.• At ...

Caution

EXTERIOR BODY PANELS > General DescriptionCAUTIONExterior body panels are heavy. When removing and installing them, do not drop and damage the panels. Also, be careful not to scratch the coated sur ...

Other materials:

Replacement of brake pad and lining
The disc brakes have audible wear indicators on the brake pads. If the brake pads wear close to their service limit, the wear indicator makes a very audible scraping noise when the brake pedal is applied. If you hear this scraping noise each time you apply the brake pedal, have the brak ...

Removal
EXTERIOR/INTERIOR TRIM > Side GarnishREMOVAL1. Remove the clips and detach the side garnish assembly.(1)Garnish ASSY - fender(2)Garnish ASSY - rear quarter(3)Garnish ASSY - side sill2. Remove the garnish assembly or protector on the fender panel.CAUTION:Do not reuse the garnish assembly and prote ...

Welcome screen and Good-bye screen
When the driver's door is opened and closed after unlocking the door, the welcome screen will appear on the multi information display for approximately 20 seconds. When the ignition switch is turned to the "LOCK"/"OFF" position, the multi information display gradually turns off (Good-bye s ...