Subaru Crosstrek Service Manual: Auto a/c control module i/o signal

Hvac system (auto a/c) (diagnostics)

...

Electrical specification

HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Auto A/C Control Module I/O SignalELECTRICAL SPECIFICATIONTerminal No.ContentMeasuring conditionStandard1Mode door actuator #4Digital signal; can not be measu ...

Other materials:

Adjustment
EXTERIOR BODY PANELS > Rear GateADJUSTMENTAdjust the clearance around the panel - rear gate as follows.PartStandardAPanel - rear gate to Roof panel6.0+1.0, −0.5 mm (0.24+0.04, −0.02 in)BSurface level gap: Panel - rear gate to Roof panel1.0±1.0 mm (0.04±0.04 in)CPanel - rear gate to ...

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Camshaft Position SensorREMOVAL1. INTAKE SIDE1. Disconnect the ground cable from battery.2. Remove the air intake duct. (RH side only) Air Intake Duct > REMOVAL">3. Disconnect the connector (A) from the camshaft position sensor, and remove the cam ...

Disassembly
DRIVE SHAFT SYSTEM > Front Drive ShaftDISASSEMBLY1. Place alignment marks on the shaft and outer race (PTJ).2. Remove the boot band and boot (PTJ).CAUTION:Be careful not to damage the boot.3. Remove the snap ring from outer race (PTJ).4. Remove the outer race (PTJ) from shaft assembly.5. Wipe off ...